top of page
This plate fits the ISUZU D-MAX 2007 - 2015 with the 4JJ1 3.0L turbo diesel engine.
This plate is best suited to those D-MAX with a small amount of intake build up. Installing this plate on an engine with significant intake build up could cause a code. If unsure of the level of build up, with the engine off, simply remove the tube running from intercooler to intake throttle body (1 hose clamp at each end) & use a torch to peer down into the intake. You will be able to judge the amount of build up easily.

This plate fits between the EGR valve and the engine block.

This plate is shipped with a protective plastic covering on one side please REMOVE THIS covering BEFORE fitting.


SKU: FP-421
  • These plates are laser cut from 2mm thick - 304 grade Stainless steel. Our design team has used lasers to etch a center-point exactly in the center of the port location to allow you to accurately and quickly drill a relief hole to any size your vehicle requires to prevent code logging or limp mode. 

  • We at FOSKO pride ourselves on providing our customers with superior quality products. We inspect every piece of your order before packing and sending - however we are only human and sometimes things do slip past us, if you find a problem with part of your order please contact us and we will work out a solution. Please note : we cannot accept returns of items which have been fitted and run in engines or if you simply change your mind. 

bottom of page